Free Shipping on Orders Over $299 | 30-Day Money-Back Guarantee Get a Free Quote

xTool S1: Five Trade-Offs I Compared Before the Purchase Order Went Out

I'm in my sixth year of managing procurement for a company that runs a small product prototyping bay and a customer gifting operation. I process somewhere between 70 and 90 purchase orders a year, roughly $140K in annual spend, split across about a dozen vendors. I report to both operations and finance, which means I spend half my time justifying gear and the other half checking whether it actually earned its keep.

Last fall, our operations manager submitted a budget request for a laser engraver. The use case was internal prototyping, branded client gifts, and the occasional replacement housing for field equipment. Not production-scale. Not 12-hour days. Maybe 15 to 20 jobs a month.

My job isn't to become a laser expert. It's to figure out what we actually need and strip the brochure claims down to something finance will sign. The xTool S1 made the shortlist alongside a basic fiber laser. Five specific trade-offs ended up driving the decision, and I'm laying them out here because the spec sheet alone doesn't answer any of them.

1. Engraving Area: The Number on the Spec Sheet vs. the Space You Actually Have

Every review I read started with the same figure: roughly 20 × 20 inches of engraving area. Sounds generous. Two problems the marketing copy never addresses.

First, can it fit in our shop corner? A 20-inch-square engraving field usually means a footprint larger than that — you need clearance for cable routing and enough headroom to open the lid and load a job. We built a cardboard template. It fit, barely, on a 48-inch folding bench that now gives up half its surface area to one machine.

Second, and more important: is 20 inches square enough for the jobs we actually get? I pulled last year's project log. Of 16 jobs, 13 would have fit in a 12 × 18 inch window. Two needed a full dimension at or near 20 inches. One needed more space than this machine offers.

So the area itself wasn't the issue. The real finding was different: once you start working near 20 inches, your pieces get heavier, harder to align, and you start worrying about focus drift across the bed. If your business does cabinet doors or large signage, the S1 isn't the wrong machine — it's just the smallest machine in its price class, and you'll be either splicing jobs or accepting multiple setups. Both of those show up on a labor spreadsheet eventually.

My takeaway: for small-shop jobs where you're working inside roughly 18 inches, 20 inches square is usable. If your definition of "max size" means "the biggest thing any client might ever send," measure your project list before you buy.

2. Rotary Tool: A Real Need or a 'Just in Case' Add-On?

The rotary attachment is a separate add-on, and it's not cheap. My default posture on gear add-ons is simple: if you can't name three specific jobs that require it, don't buy it yet.

So I asked the operations manager for three confirmed cylindrical projects this year. He could name one — a batch of thermoses for a client appreciation event.

Then I did what I usually do: I asked the person who'd actually be running the machine. The shop lead's answer was different. He said once people find out the machine can rotate, they'll start asking for more — mugs, small-batch drinkware, tube segments for fixture testing. His argument was that the rotary tool doesn't expand throughput on existing jobs. It expands the range of jobs that walk in the door.

That's a completely different argument. And the honest version is: if you're strictly running a procurement spreadsheet, the rotary tool's first-year numbers probably look negative. The cost is real, and so is the learning curve. It only pays back if you have a zero-to-one product idea in the first six to nine months.

I don't have hard data on how many shops actually use their rotary attachment regularly. What I can say anecdotally is that in our case, we bought it, and it sat mostly untouched for about two months. Then it became the most-used accessory for a client run we didn't anticipate.

My takeaway: if you have signed or committed cylindrical work, buy it. If it's speculative, wait until the work shows up. I've seen too many of these gather dust in the back of the shop.

3. Laser Engraving Spray: Necessary Consumable or Skippable Add-On?

The spray question is subtler than it looks. The premise: an applied compound helps absorb heat and boost mark contrast during engraving. With a diode laser on metal and glass, your mark can be nearly invisible without it.

I ran a simple test on scrap — bare stainless on one side, a brushed-on layer of marking compound on the other. The difference was noticeable. The bare half was legible under angled light and nearly invisible head-on. The treated half produced a clean dark mark that read from across the shop.

Same story on glass.

But the finding that mattered: on wood, the spray added negligible contrast and left a tacky residue we had to wipe off. On leather, results were inconsistent — clean in some areas, faint in others. So it's not a good-or-bad question. It's a consumable with a specific answer: how many metal and glass jobs come through the door?

Our mix runs roughly 60 percent wood, 25 percent acrylic, 15 percent metal and glass. So yes, we needed the spray. The per-job cost, even accounting for half a can going to waste in coverage experiments, was clearly worth it.

My takeaway: if you're all-wood and acrylic, skip it. If you're doing metal or glass, budget it into per-piece cost as a consumable, not as a one-time upgrade.

4. Metal Cutting: What the S1 Can Do vs. What a Real CNC Laser Metal Cutter Does

Here's where I tell you what this machine can't do.

The xTool S1 is a diode laser platform. The 40W configuration, if your budget allows, does improve cutting performance on your standard stock. But "40W diode" does not equal "metal cutter." It will mark and shallow-engrave thin metal — maybe 0.5 to 1mm stainless, depending on settings and air assist. It is not a structural metal cutting machine. That's not a flaw. It's just a fact about the equipment category.

If you legitimately need to cut 2mm or thicker steel, aluminum, or copper, you need a fiber laser or a CNC plasma cutter. Those are a different price bracket, a different footprint, and a different safety conversation.

And any claim otherwise should be treated as a warning sign. The FTC's advertising guidelines require product claims to be truthful, not misleading, and substantiated with evidence. That's why the honest phrasing when evaluating any laser marked as a "CNC laser metal cutter" is: what metal, what thickness, how many passes, and does the spec sheet say "unlimited."

For the S1, the honest version is: marking and shallow engraving, yes. Structural cutting, no. That boundary is actually what makes it useful as a small-shop tool — it does what it does without pretending to be something it isn't.

My takeaway: buy it for marking and engraving metal parts, not for fabricating raw sheet metal. If you need raw sheet, look at fiber.

5. Free DXF Files: Source and Quality Gaps

This is the hidden cost nobody talks about.

You buy a laser, someone mentions you can grab free DXF files online. True. But the frustrating part of free DXF files: they work well enough to get you started, then surprise you with errors on a paid job.

Our process designer downloaded about 40 files from five different libraries. Some ran cleanly. Some had nesting errors that doubled runtime on the S1. And a few were licensed such that you can't use them commercially — which matters when the company name is on the client gift.

The problem isn't that free files are bad. It's that they lack support, quality standards, and often clear usage terms. If you're delivering a custom job, you need a licensed source. If you're just running internal test prints, free is fine.

My takeaway: treat free DXF as a prototyping tool for internal work. Once you're charging money, either buy the licence, draw it yourself, or have your designer draw it. The cost of a client seeing a failed cut is much higher than the $5 to $15 a legit DXF file costs.

What the S1 Fits, and What It Doesn't

Four months in, here's how the five comparisons have played out in actual use:

  • Engraving area: Fine. We've never had a job that required splicing.
  • Rotary tool: Slow start, then steady use. One client run alone justified the cost.
  • Laser spray: Consumable, necessary for our metal markers. Buying it by volume, not by the unit.
  • Metal cutting: No surprises. The S1 handles our marking jobs. We farm out raw metal cutting to a local shop.
  • Free DXF files: No longer used for client work. Our own designs run about $100 to $150 a month in licensing, and that's cheaper than one angry client.

Where the S1 makes sense for a shop like ours: you want a machine that handles wood, acrylic, leather, glass, and light metal marking with one setup, and you're not trying to run production volume. Where it doesn't: you're buying it as a metal cutter, or you're expecting it to handle cabinet-sized panels without multiples.

If I had to compress the whole comparison down to one sentence: the machine is competent at a specific set of jobs, and the procurement decision comes down to whether those jobs match the ones that walk through your door. For us, they did. For a shop that's primarily doing structural metal work, this isn't the right machine — and no spec sheet is going to change that.

author-avatar
Jane Smith

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Leave a Reply